What I did...

[ View Thread ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

Subguns.com NFA Firearms Discussion Archive

What I did...

Posted By: Shattered Mind
Date: 3/10/09 14:39

In Response To: I noticed the same thing w/my HK33 .22LR kit... (LongDuck)

The extractor is NOT held in by the horizontal tabs in the back, only the lil' semi circles in the front. I took a screwdriver blade and just wedged it out a bit, up and over the HK retainer. Then did the same with the other side. It then just falls out.
I had to use a dremel grinding disk (small one) to just kiss the two horizontal tabs towards the back a bit to clear the center rail in the HK unit. Careful... I'm assuming you don't want any binding issues but you don't want it to wiggle around either.
Assembly was just the reverse of removal, although next time I do the install, I'm going to find a very small c-clamp to brace the extreme rear of the extractor and help hold it in as I wedge the front ends around and below the hold in tabs. It was a bit tedious to try to get the thing to lie flat while manhandling the front around.
Forget filing these things... they're hard as hell. It laughed at my file... no seriously... I heard it.

Messages In This Thread

Shameless plug fer the Hippie... -- Shattered Mind -- 3/10/09 00:32
- sooo it worked better than the original or ? -- Rudolf -- 3/10/09 00:45
  - Just as good... -- Shattered Mind -- 3/10/09 01:20
    - I noticed the same thing w/my HK33 .22LR kit... -- LongDuck -- 3/10/09 13:28
      - What I did... -- Shattered Mind -- 3/10/09 14:39
- How many cabnet doors you go throught in a year? -- NoHair -- 3/10/09 01:35
  - Ummm... -- Shattered Mind -- 3/10/09 13:04
    - Your always thinking.. -- Mike_G -- 3/10/09 13:26
- Thanks! -- Bill G -- 3/11/09 19:57

[ View Thread ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

Subguns.com NFA Firearms Discussion Archive is maintained by Administrator with WebBBS 5.12.

All contributions become the property of subguns.com and are copyright © by Tom Bowers as of the time of posting. No content may be reposted or published without written consent of Tom Bowers.
Disclaimer: The subguns.com discussion boards are open to the public, its users may express their opinion or speculate, and as such, posted information cannot be assumed to always be factual. The views, opinions, and conclusions expressed in this page are those of the author or organization and not necessarily those of subguns.com or anyone affiliated with subguns.com in an official capacity. The content of this page has not been reviewed or approved by subguns.com, and the author or organization is solely responsible for its content.